Understanding Additron Technologies Propriety Nano enhanced Process for the Non - Scientist

Released on: May 23, 2008, 5:08 am

Press Release Author: Additron Technologies Inc.

Industry: Energy

Press Release Summary: Liquid fuel synthesis: Making it up as you go along

Press Release Body: Our scientist can make liquid fuel from low grade coal.
We started looking at the Fischer-Tropsch synthesis as a way of converting solid
hydrocarbons or natural gas into liquid fuel. The great advantage is energy
security: Fischer-Tropsch technology allows domestic coal to replace foreign oil,
which is pretty attractive if you\'re sitting in Beijing. Another potential advantage
is environmental: the fuel produced by Fischer-Tropsch methods can be made to burn
more cleanly than diesel. It could thus ease or eliminate the adaption of cars with
efficient diesel engines in countries, such as the China.

The obvious drawback, though, has been environmental. The process of converting coal
into liquid and using it for transportation releases nearly twice as much carbon
dioxide as burning diesel made from crude oil does. In a world conscious of climate
change, that excess carbon is a problem. \"If you make liquids from coal and don\'t
capture carbon dioxide in the process, you\'re effectively doubling emissions,\" says
Eric Larson, a research engineer at Princeton University\'s Environmental Institute
in New Jersey.

One way round this problem might be to take the carbon dioxide and bury it
underground. Another would be to replace fossil-fuel feedstock with biomass. That is
in some ways an attractive option - but it is also, as yet, an immature technology.
We at Additron have developed a process that reduces carbon emmissions by up to 80%
during production and that is by using our Propriety Nano enhanced formula that uses
intense heat and steam to trap the carbon dioxide almost in its entirety.

Expense is another issue. To date, Fischer-Tropsch has always been rather costly,
and thus something people normally start to do only when they have no alternatives.
Its first major use was during the Second World War, when the blockaded Nazis
produced about 90% of their diesel and aviation fuel with the technologies
originally developed by Franz Fischer and Hans Tropsch at the Kaiser Wilhelm
Institute for Coal Research in 1923. South Africa began liquefying coal in response
to apartheid-era sanctions, and in part as a result of its investment back then,
continues to derive about 30% of its fuel from liquefied coal. When we started
investigating the CTL process in the mid nineties we saw a huge shortage of crude
oil within the decade and invested huge amounts of funds into research and
development.

Well guess what - Oil has just topped $127 per barrel. For our process to be cost
effective oil should be more expensive than $65 per barrel. It is now almost twice
that and we are perfectly placed to lead and revolutionize the energy sector with
our answer and process which is economical and environmental.

To make liquid fuel from coal, you first shatter the long hydrocarbon chains into a
mixture of hydrogen and carbon monoxide using high temperatures and intense
pressure. This is also the first step for the \"integrated gasification combined
cycle\" plants, seen by many as the future of coal-fired generation - a technology
that has many synergies with coal-to-liquids. In Fischer-Tropsch synthesis, the gas
is not burned but channelled to a reactor where catalysts reunite the carbon and
hydrogen to form hydrocarbon chains of varying lengths, including diesel and petrol.
During both phases - gasification and liquefaction - some carbon is given off as
carbon dioxide. Our process traps that carbon dioxide in tiny tubes and steam is
forced in which basically soaks up the carbon dioxide.

Because contaminants such as mercury and sulphur can inhibit the reaction, we have a
built-in incentive to remove impurities from the gas before liquefying it. And the
choice of catalyst allows the make-up of synthetic fuel to be tailored to an extent.
As a result, diesel, petroleum and jet fuel produced by the Fischer-Tropsch process
is quality stuff. It contains less sulphur and fewer contaminating aromatic
compounds, such as benzene and toluene, and releases fewer particulates when burnt
than regular diesel fuel does.

Capturing carbon

In China - which, like the United States, is not bound by the Kyoto Protocol, and
which has vast coal reserves - carbon sequestration is more likely. Yong-Wang Li,
director of Synfuels China in Shanxi, says that there are two coal-to-liquid
industrial plants under consideration in China and that, at present, Additron Tech
seems the most likely candidate to supply their Propriety formula.

The advantage of using plant biomass as a feedstock from which to make synthetic
fuel, on the other hand, is that no sequestration is necessary - the emitted carbon
is carbon that came from the air in the first place. If one were to add
sequestration to a biomass-to-liquids plant, the result could be \'carbon negative\',
in that the net effect on the atmosphere would be to draw down the level of carbon
dioxide as some of the carbon dioxide fixed by the plant would be sequestered into
the planet\'s crust. What\'s more, Fischer-Tropsch methods could complement, at the
very least, some other biomass technologies.

Biomass boost

Nevertheless Chevron, Shell and Exxon have all invested in development of
Fischer-Tropsch technologies, as has the biggest US coal company, Peabody Coal,
which is working on Schweizer\'s Roundup plant with Rentech of Denver, Colorado.
\"Some of the big players are willing to take a low rate of return just to establish
a technology position,\" says Bartis. \"Once you build a first plant, you\'re going to
learn by doing, and subsequent plants are going to cost less.\" Another strategy is
to concentrate on people who might pay a premium for domestic hydrocarbons.
Syntroleum of Tulsa, Oklahoma, recently provided samples of its natural-gas-derived
jet fuel, made with technology licensed from Exxon Mobil, to the US Air Force for
testing.

That is why, until biomass supply and technology are scaled up, there is still the
appealing option of spiking coal feedstock with biomass. Coupled with carbon
sequestration, this would reduce greenhouse gas emissions without requiring much
change to existing technology, says Robert Williams, a researcher at Princeton
University\'s Environmental Institute. Williams has calculated that a mixture of 89%
coal and 11% biomass could reduce carbon emissions by 19% relative to using the same
process with coal only.

Because they can\'t yet make money, current Fischer-Tropsch projects often involve a
complex mix of industry partners and government subsidies. Sasol of South Africa, a
veteran in the easier gas-to-liquids game, considers government subsidies crucial.
Sasol is conducting feasibility studies for coal-to-liquid projects in China and
India, and has partnered with oil giant Chevron in Europe. But it is waiting to see
what develops with government subsidies, according to chief executive Pat Davies,
before committing to any US projects.

So far, the US federal government has proposed tax credits for coal-to-liquid
programmes, and provides grants to interested companies. States are also pitching
in: Pennsylvania, for example, is guaranteeing $465 million in loans and $47 million
in tax credits for a proposed plant in Schuylkill County. Elsewhere in the world -
in China, India and the Philippines, for example - liquefaction projects have
received pledges of strong government support. And in Germany, biomass-derived fuels
are exempt from the heavy taxes levied on other fuels.


Web Site: http://www.additrontech.com

Contact Details: Contact Details: Additron Technologies Inc.
Shen Xiang Road, Zhu Jia Jiao Town
Qing Pu Area, Postalcode: 201714
Shanghai, R.O.C

General Inquiries: info@additrontech.com
Investor Relations: investorrelations@additrontech.com


Tel: +86-21-5129-4510
Fax: +86-21-5129-4513

  • Printer Friendly Format
  • Back to previous page...
  • Back to home page...
  • Submit your press releases...
  •